Skip to content

5045E

  • 50 engine hp
  • Best-in-class visibility
  • Thick comfortable seat
  • 5-Year Powertrain Warranty

Price may vary based on location and options.

Load More. Lift More. Do More.

When it comes to hydraulic power and capacity, it's hard to beat the 5E Series. With a rear hitch lift capacity of nearly 3,200 pounds, lifting and transporting those heavier implements - like rotary tillers and heavy seeders - are not an issue. Around the front, add a John Deere loader for up to 3,548 pounds lift capacity.

Built Tough. For Every Job.

With 9F/3R SyncShuttle and 12F/12R PowrReverser available on the 55-75 horsepower model and a 12F/12R PowrReverser and 24F/12R PowrReverser transmission available on 85 and 100 horsepower models you'll have easy direction control (forward and reverse) and speed-matching for any application.

features

Adding ease to operation
Enhanced operator controls Enhanced operator controls

Operator comfort is important regardless of the application. Improving the 5E 3-Cylinder Tractor models, the hand throttle has been relocated to the right-hand console. This is 30.5 cm (12-in.) closer to the operator and within easy reach versus the previous location on the center-hand console. Operators may also notice the additional legroom provided by the repositioned loader controls, providing a more enjoyable experience.

Nine forward and three reverse speeds with in-line synchronized shuttle shifting

The SyncShuttle transmission is designed to match the excellent power and torque characteristics of the John Deere PowerTech™ engines. Transmission durability is enhanced with the pressure-lubricated top shaft, allowing an operator to achieve performance from one working season to the next. Additionally, this in-base transmission is configured with fixed draft links, single-speed power take-off (PTO) and mechanical PTO engagement.

 

The transmission is characterized as full top shaft synchronized (TSS) when forward shifting on-the-go between speeds, and is characterized a synchronized while depressing the clutch.

 

2100 engine rpm
    16.9-28
  Tire 0.671 RR
Gear Rear Wheel Speed Ground Speed
  rpm kmph
A1 9.1 2.3
A2 12.4 3.1
A3 17.0 4.3
A Rev -13.5 -3.4
B1 23.1 5.8
B2 31.4 7.9
B3 43.2 10.9
B Rev -34.2 -8.6
C1 58.9 14.9
C2 80.3 20.3
C3 110.3 27.9
C Rev -87.3 -22.1

 

Creeper available for R2 and R4 as field installed kit with following speeds in kmph.

Creeper 1 0.40
Creeper 2 0.54
Creeper 3 0.75
Creeper Rev -0.59
Easy and comfortable shifting
Operator-friendly transmission controls with hand throttle Operator-friendly transmission controls with hand throttle
Synchronized shifting in all forward and reverse gears Synchronized shifting in all forward and reverse gears
Range selection pattern Range selection pattern

Nine forward and three reverse (9F/3R) speeds are achieved by using two platform-mounted levers for shift operation. The gear lever at the operator's right hand selects one of three forward gears and one reverse gear, as well as the integrated park position. The range lever at the operator's left hand selects collar-shift A, B, and C ranges.

Operators can easily switch directions without having to completely stop the tractor with synchronized, in-line, shuttle-shift capability between forward and reverse gears on the gear-shift lever in all three ranges (A, B, and C ranges).

A neutral start switch requires the gear-shift lever be in the neutral or park positions to start the engine.

A positive park pawl on the transmission provides positive park and eliminates the need for a hand brake. This also eliminates clutch service costs that occur when the park brake is accidentally left engaged.

A smaller, more efficient after-treatment device provides more space under the hood A smaller, more efficient after-treatment device provides more space under the hood

The 5045E, 5055E, 5065E, and 5075E Utility Tractors meet U.S. Environmental Protection Agency (EPA) Final Tier 4 (FT4) exhaust emissions regulations with a diesel oxidation catalyst (DOC)/diesel particulate filter (DPF) system. Modifying the after-treatment device resulted in better forward and side visibility around the hood. The hood slope of the updated design is comparable to the Tier 2 tractors previously produced. Similar to the system on the 5M, the purpose of the DOC/DPF combination is to reduce toxic gases emitted from the exhaust, as well as to filter particulate matter to prevent it from becoming airborne.

 

As the tractor continues to operate over time, as is the case with any filter, the DPF will accumulate particulate matter and will need to be cleaned. It is cleaned through a process called regeneration. During a regeneration cycle, exhaust temperatures increase to burn off the excess particulate matter. On a John Deere 5 Series Tractor equipped with a DOC/DPF, the operator does not need to provide any input to trigger the regeneration process.

Exhaust filter cleaning switch Exhaust filter cleaning switch

On the dash is an exhaust filter cleaning switch. As long as this switch remains in the auto position, the tractor is in full control of the regeneration process and will regenerate on an as-needed basis during operation. The operator just continues to operate the tractor as normal while the regeneration process takes place.

 

There may be times a tractor is operating in an environment not suitable for a regeneration cycle, such as in a confined area or during service. For this reason, the bottom section of the exhaust filter cleaning switch can be depressed to disable the regeneration. The disable position allows the operator to temporarily inhibit the regeneration cycle. The operator should return the switch to auto mode as soon as possible to avoid continued soot buildup in the exhaust filter, which can lead to a parked regeneration. John Deere does not recommend disabling the automatic exhaust filter cleaning unless it is absolutely necessary.

 

The simplicity and intuitiveness of the exhaust filter cleaning switch maximizes uptime by minimizing the operator’s input into the regeneration process. This increases the overall productivity of the tractor by reducing the chances of a parked regeneration. The operator-friendly interface allows the operator to easily complete the task at hand, even during the regeneration process.

specs

Engine descriptionJohn Deere PowerTech 3029
Engine displacement3 cylinders: 2.9 L
179 cu in.
Rated engine powerAt 2100 rpm: 37.4 kW
50 hp
Rated PTO power (hp SAE)At 2100 rpm: 27.6 kW (37 PTO)
Maximum PTO power@ 1800 RPM
Open Station: 28.5kw (38hp)
Transmission typeStandard: 9F/3R SyncShuttle
Hydraulic pump rated outputStandard: 66.1 L/min
17.5 gpm
Rear hitch category (SAE designation)Category 2; convertible to 1
DescriptionJohn Deere PowerTech 3029
AspirationTurbocharged
Cylinders linersWet sleeved
Displacement3 cylinders: 2.9 L
179 cu in.
Rated powerAt 2100 rpm: 37.4 kW
50 hp
Rated PTO power (hp SAE)At 2100 rpm: 27.6 kW (37 PTO)
Maximum PTO power@ 1800 RPM:
Open Station - 28.5kw (38hp)
TypeStandard: 9F/3R SyncShuttle
ReverserNo
Clutch; wet/dryDry
TypeOpen Center
Pump rated outputStandard: 66.1 L/min
17.5 gpm
Available flow at a single rear SCV43.4 L/min
11.5 gpm
Number of rear selective control valves (SCVs)standard: 1
Optional: 2
Number of mid selective control valves (SCVs)Standard: 0
Optional: 2
Joystick SCV control2WD: FIK
MFWD: Standard
Hitch draft control load sense typeMechanical
Remote control valves availableStandard: 1
Optional: 2
Hitch category (SAE designation)Category 2; convertible to 1
Maximum lift capacity behind lift pointsOECD hitch lift cap at 24 behind: 3192 lb
1448 kg
Sensing typeTop link
TypeStandard: Independent 540
Engine rpm (at rated PTO speeds)540 at 2100 rpm
PTO actuationMechanical (lever)
Final drive typePlanetary
Differential controlsMechanical (pedal)
Axle typeFlanged
Brakes, type and controlHydraulic wet disc
Front2WD: 7.5-16 R1
MFWD: 9.5-24 R1
Rear2WD: 13.6-28 R1
MFWD: 13.6-28 R1
Turning radius with brakes2WD: 3.1 m
10.2 ft
MFWD: 3.94 m
12.9 ft
Turning radius without brakes2WD: 3.5 m
11.5 ft
MFWD: 4.65 m
15.3 ft
Type of bulb in beacon (Halogen, Zenon, LED)
Type of bulb in headlight (Halogen, Zenon, LED)
Rollover protective structure, OOSRigid - foldable - telescopic
Foldable, 2-post
Platform - flat/straddle
Straddle
Gearshift location - console/floor
Floor, on the side
SeatMechanical
Wheelbase2WD and MFWD: 2050 mm
80.7 in.
Overall length3639 mm
143.3 in.
Approximate shipping weight, Open;CabMFWD: 2525 kg
5566 lb
Base machine weight

Fuel tankStandard: 72.5 L
19 U.S. gal.
Country of manufactureSub assembly in Pune, India, Final assembly in Augusta, GA

Offers & Discounts

Summer Deals on Utility Tractors

Check out our best summer deals on 44 - 90 HP utility tractors. Financing available at 0% for 84 months with no money down. Save up to $4,000 when you trade in select comparable competitive models.

Offers end August 4, 2020. Offers valid while supplies last. Offers valid on in-stock units only. Prices and availability may vary by dealer. Taxes not included. Subject to approved credit by John Deere Financial. Down payment may be required. Taxes, freight, set up and delivery charges could increase the monthly payment. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details. Images for illustration purposes only.

0% APR fixed rate for 60 months¹ AND Save $2,250⁴ on New John Deere 5045E Utility Tractors

  • 0% APR fixed rate for 60 months¹ OR
  • 1.90% APR fixed rate for 72 months² OR
  • 1.90% APR lease rate for 36 months³

AND

  • Save $2,250⁴
  • Offers available 01 May 2020 through 04 August 2020

Save $350 with the purchase of two or more Implements ‑

Click for details

¹Offer valid on qualifying purchases made between 01 May 2020 to 04 August 2020. Subject to approved installment credit with John Deere Financial. No down payment required. $16.67 per month for every $1,000 financed. 0% APR for 60 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

²Offer valid on qualifying purchases made between 01 May 2020 to 04 August 2020. Subject to approved installment credit with John Deere Financial. No down payment required. $14.68 per month for every $1,000 financed. 1.90% APR for 72 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

³Offer valid on qualifying purchases made between 01 May 2020 to 04 August 2020 and is subject to approval by John Deere Financial. 1.90% APR lease rate for exempt states only for up to 36 months operating lease or lease purchase. Taxes, freight, setup and delivery charges could increase monthly payment. Payments may vary based upon the end of lease term purchase option price and length of lease term. Not available for consumer use. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

⁴Offer available on qualifying purchases made between 01 May 2020 to 04 August 2020. Prices and models may vary by dealer. Save $2,250 on 5045E only. This can only be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Some restrictions apply. See participating dealer for details and other financing options. Offer is available only at participating United States dealers. Prices and savings are in U.S. dollars.

$179 monthly payment option¹ on New John Deere 5045E Utility Tractors

  • $179 monthly payment option¹
  • Offers available 01 May 2020 through 04 August 2020

¹Offer valid on qualifying purchases made between 01 May 2020 to 04 August 2020. Subject to approved installment credit with John Deere Financial. Down payment may be required. Average down payment is 20%. $179 monthly payment based on Sales Price of $18,701 with $3,740 down payment or trade-in, 84 months at 0% APR. Attachments, taxes, freight, setup and delivery charges could increase monthly payment. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

Reviews

4.2
(5 reviews)
Recommended by 80.0%
Write a review
5 star
4
4 star
0
3 star
0
2 star
0
1 star
1
Value4.2
Quality4.2
Ease of Use4.6

Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.

Our sales staff cares about finding the best unit for your needs