Imagine changing your tillage depth faster than climbing out of your cab. For the first time ever, you can adjust tillage depth and pressure in only six seconds - a job that previously took 12 to 20 minutes. Make the change without climbing out of your cab, using only your fingertips and lowering your operating costs.
When executed correctly, tillage can deliver great returns to your farm by increasing crop yield and reducing risk. The end goal of all tillage is to help create a level, smooth seedbed free of weeds. This provides the greatest opportunity for your planter or seeder to accurately and consistently place the seed at the correct depth and enable uniform crop emergence, setting the stage for maximum yield potential.
At 16-km/h (10-mph) working speeds, the 2230LL can cover up to 29.5 hectares (73 acres) per hour enabling producers to size their implement for their unique productivity and agronomic needs.
The 2230LL is available in sizes ranging from 7.8 m to 18.4 m (25 ft, 6 in. to 60 ft, 6 in.). Horsepower requirements range from 19.6 to 29.4 kW/m (8 to 12 hp-ft), depending on the soil, depth, and speed.
Working widths | Centerframe size | Productivity per hour at 16 km/h (10 mph) |
7.77 m (25 ft, 6 in.) | 2.74 m (9 ft) | 12.5 ha (31 acres) |
9.60 m (31 ft, 6 in.) | 3.35 m (11 ft) | 15.4 ha (38 acres) |
10.21 m (33 ft, 6 in.) | 16.6 ha (41 acres) | |
10.82 m (35 ft, 6 in.) | 17.4 ha (43 acres) | |
13.25 m (43 ft, 6 in.) low transport | 3.35 m (11 ft) | 21.4 ha (53 acres) |
Working widths | Centerframe size | Productivity per hour at 16 km/h (10 mph) |
14.17 m (46 ft, 6 in.) | 2.74 m (9 ft) | 22.7 ha (56 acres) |
15.39 m (50 ft, 6 in.) | 24.7 ha (61 acres) | |
18.44 m (60 ft, 6 in.) | 3.35 m (11 ft) | 29.5 ha (73 acres) |
The Level-lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting.
The combination of the sweep and harrow functions promotes consistent and uniform chemical placement and mixing. The T-hitch enables easy turnbuckle adjustment for fast tractor changeover and quick implement leveling fore to aft.
The heavy-duty T-hitch allows for tighter turning, decreasing the number of headlands required for quick turns on the end. The T-hitch also houses the hoses and wiring harness, protecting them from crop and incidental tire contact.
Thanks to an updated frame design that enables true 152-mm (6-in.) split-the-middle shank spacing, the 2230 Field Cultivators can maintain consistent depth and evenly cover the field to achieve an optimal seedbed and manage weeds.
Even at high speeds and in tough field conditions, the TruPosition C-shanks with 91 kg (200 lb) of trip force minimize side-to-side movement and provide the operator better control of the soil profile for improved leveling capabilities.
These shanks provide a full tillage cut across the entire width of the implement. The shanks stay firmly planted in tough soils without quickly relieving. As a result, the soil is mixed completely and streaks are reduced. This helps producers maximize their productivity and create flat seedbeds for smooth planter operation and consistent seed depth.
The even 152-mm (6-in.) split-the-middle shank spacing enables the 2230 Field Cultivator to minimize the potential of remaining strips of weeds that survive the tillage pass. With a field cultivator pass just prior to planting/seeding, the crop can emerge into a weed-free field that gives it the best chance to reach canopy ahead of the weeds.
If some weeds emerge and a post-emergence herbicide is needed, weeds should be smaller and easier to control. As a result, the field cultivator pass helps keep weed management costs under control and helps preserve crop yield potential.
152-mm (6-in.) shank spacing base equipment on the 2230LL and 2230FH. Additional options for implement customization include:
The ProFinish Leveling System offers a wide range of rear harrows to meet agronomic needs.
Depending on agronomic needs, producers have a choice of six rear harrow options included in the ProFinish Leveling System on the 2230 Field Cultivators.
Capabilities | Five-bar coil-tine harrow | Six-bar spike-tooth harrow | Three-bar coil-tine with round-bar basket | Three-bar coil-tine with flat-bar basket | Three-bar spike-tooth with round-bar basket | Three-bar spike-tooth with flat-bar basket |
Level seedbed | Better | Better | Best | Best | Best | Best |
Firm seedbed | Fair | Good | Best | Better | Best | Better |
Handle residue | Best | Better | Best | Best | Better | Better |
Break up clods | Good | Better | Better | Best | Better | Best |
Handle moisture/wet soil | Best | Better | Good | Good | Good | Good |
Handle rocks | Best | Good | Better | Good | Better | Good |
Wing stabilizer wheels are recommended when producers encounter rolling ground conditions, terraces, or when the tool is operated at speeds above 11 km/h (7 mph).
Stabilizer wheel options and quantities are dependent on the model.
On the 2230LL Level-lift™ Field Cultivator, two mechanical wing stabilizer wheels are included on the outer wings for all five-section configurations. Both three-section and five-section configurations have the option to add stabilizer wheels to the inner wings.
On the 2230FH Floating Hitch Field Cultivator, the 12.95-m (42-ft, 6-in.) low-transport configuration has the option of adding a pair of mechanical stabilizer wheels. The active-hydraulic castering wheels are included in base equipment for the inner and outer wings on the 2230FH.
Radial and bias-ply tire options are available for mechanical stabilizer wheels and active-hydraulic castering wheels.
NOTE:Not all tire options are available for all configurations.
Configuration | Mechanical stabilizer wheels | Active-hydraulic castering wheels | |||
Base quantity | Optional quantity | Base quantity | Optional quantity | ||
2230LL | Three-section | --- | 2 | --- | --- |
Five-section | 2 | 2 | --- | --- | |
Low transport | --- | 2 | --- | --- | |
2230FH | Three-section | --- | --- | 4 | --- |
Five-section | --- | --- | 6 | --- | |
Low transport | --- | 2 | 4 | --- |
Radial Tire Sizes | |||
Main Frame | Wing Frame |
||
2230LL | Three-section | N/A | IF280/80 R15 Six bolt |
Five-section | IF280/70 R15 |
IF280/70 R15 |
|
Low transport | N/A | IF280/80 R15 Six bolt |
|
2230FH | Three-section | IF280/70 R15 |
IF280/70 R15 |
Five-section | IF320/70 R15 |
IF320/70 R15 |
|
Low transport | IF320/70 R15 |
IF320/70 R15 |
Bias Tire Sizes | |||
Main Frame | Wing Frame |
||
2230LL | Three-section | N/A | 9.5L-15 LD D Six bolt |
Five-section | 9.5L-15 LD D |
9.5L-15 LD D |
|
Low transport | N/A | 9.5L-15 LD D Six bolt |
|
2230FH | Three-section | 11L-15 FI LR D |
11L-15 FI LR D |
Five-section | 12.5L-15 FI LR F |
12.5L-15 FI LR D |
|
Low transport | 12.5L-15 FI LR D |
12.5L-15 FI LR D |
A substantial rear hitch is available to give the 2230 the versatility to pull other rear attachments. The rear hitch includes:
The rear hitch is fully compatible with all 2230 rear harrow configurations available in the ProFinish™ Leveling System.
For customers with a seedbed finisher or rear attachment exceeding the above standard hitch ratings, it is recommended to install the heavy-duty rear hitch support. A heavy-duty rear hitch support is used in conjunction with the standard rear hitch and is compatible with both three-section and five-section 2230FH and 2230LL field cultivators.
Low power lines and bridges can be a concern when transporting equipment. The 2230 Field Cultivator lineup includes low-transport configurations as a solution for transportation concerns.
The 2230LL has two low-transport configurations. These implements fold like a five-section implement but operate like a three-section implement for improved transportability thanks to the addition of small outer wings that lock rigid for field operation.
Another advantage of the low-transport models is operation over uneven terrain. The low-transport models allow for the rigid wing to follow the contour of the ground.
Working width | Transport height | Transport width |
13.3 m (43 ft, 6 in.) | 4.4 m (14 ft, 4 in.) | 5.5 m (18 ft) |
Working widths - 3-section | Option 1: 7.16 m (23.5 ft) Option 2: 7.77 m (25.5 ft) Option 3: 8.38 m (27.5 ft) Option 4: 8.99 m (29.5 ft) Option 5: 9.6 m (31.5 ft) Option 6: 10.2 m (33.5 ft) Option 7: 10.85 m (35.5 ft) Option 8: Low Transport - 11.73 m (38.5 ft) Option 9: Low Transport - 13.25 m (43.5 ft) |
5-section | Option 10: 12.95 m (42.5 ft) Option 11: 14.17 m (46.5 ft) Option 12: 15.4 m (50.5 ft) Option 13: 16 m (52.5 ft) Option 14: 17.22 m (56.5 ft) Option 15: 18.44 m (60.5 ft) |
Rigid frame - 3-section | Option 1: 4.19 m (13.75 ft) Option 2: 4.19 m (13.75 ft) Option 3: 4.19 m (13.75 ft) Option 4: 4.19 m (13.75 ft) Option 5: 4.78 m (15.67 ft) Option 6: 4.78 m (15.67 ft) Option 7: 4.8 m (15.75 ft) Option 8: 4.27 m (14 ft) Option 9: 5.45 m (18 ft) |
5-section | Option 10: 4.27 m (14 ft) Option 11: 4.27 m (14 ft) Option 12: 4.27 m (14 ft) Option 13: 4.9 m (16.08 ft) Option 14: 4.9 m (16.08 ft) Option 15: 4.9 m (16.08 ft) |
Transport height (without rear harrow) - 3-section | Option 1: 3.43 m (11.25 ft) Option 2: 3.66 m (12 ft) Option 3: 3.94 m (12.92 ft) Option 4: 4.22 m (13.83 ft) Option 5: 4.24 m (13.92 ft) Option 6: 4.52 m (14.83 ft) Option 7: 4.8 m (15.75 ft) Option 8: 4.11 m (13.5 ft) Option 9: 4.37 m (14.33 ft) |
5-section | Option 10: 3.83 m (12.58 ft) Option 11: 4.09 m (13.5 ft) Option 12: 4.37 m (14.33 ft) Option 13: 4.32 m (14.17 ft) Option 14: 4.62 m (15.17 ft) Option 15: 4.93 m (16.17 ft) |
Operating depth - Inches | Up to 12.7 cm 5 in. |
Miles per hour | 10 to 16 km/h 6 to 10 mph |
Horsepower per foot | 19.6 to 29.4 kW/m 8 to 12 hp/ft |
Standard spacing - Inches | Split-the-middle 15.2 cm 6 in. *22.9 cm 9 in. and S-tine *11.4 cm 4.5 in. options (*spacing may not be exact in all locations) |
Type | Over-center fold |
3-section | Option 1: 7.16 m (23.5 ft) Option 2: 7.77 m (25.5 ft) Option 3: 8.38 m (27.5 ft) Option 4: 8.99 m (29.5 ft) Option 5: 9.6 m (31.5 ft) Option 6: 10.2 m (33.5 ft) Option 7: 10.85 m (35.5 ft) Option 8: Low Transport - 11.73 m (38.5 ft) Option 9: Low Transport - 13.25 m (43.5 ft) |
5-section | Option 10: 12.95 m (42.5 ft) Option 11: 14.17 m (46.5 ft) Option 12: 15.4 m (50.5 ft) Option 13: 16 m (52.5 ft) Option 14: 17.22 m (56.5 ft) Option 15: 18.44 m (60.5 ft) |
3-section | Option 1: 4.19 m (13.75 ft) Option 2: 4.19 m (13.75 ft) Option 3: 4.19 m (13.75 ft) Option 4: 4.19 m (13.75 ft) Option 5: 4.78 m (15.67 ft) Option 6: 4.78 m (15.67 ft) Option 7: 4.8 m (15.75 ft) Option 8: 4.27 m (14 ft) Option 9: 5.45 m (18 ft) |
5-section | Option 10: 4.27 m (14 ft) Option 11: 4.27 m (14 ft) Option 12: 4.27 m (14 ft) Option 13: 4.9 m (16.08 ft) Option 14: 4.9 m (16.08 ft) Option 15: 4.9 m (16.08 ft) |
3-section | Option 1: 3.43 m (11.25 ft) Option 2: 3.66 m (12 ft) Option 3: 3.94 m (12.92 ft) Option 4: 4.22 m (13.83 ft) Option 5: 4.24 m (13.92 ft) Option 6: 4.52 m (14.83 ft) Option 7: 4.8 m (15.75 ft) Option 8: 4.11 m (13.5 ft) Option 9: 4.37 m (14.33 ft) |
5-section | Option 10: 3.83 m (12.58 ft) Option 11: 4.09 m (13.5 ft) Option 12: 4.37 m (14.33 ft) Option 13: 4.32 m (14.17 ft) Option 14: 4.62 m (15.17 ft) Option 15: 4.93 m (16.17 ft) |
Inches | Up to 12.7 cm 5 in. |
Miles per hour | 10 to 16 km/h 6 to 10 mph |
Horsepower per foot | 19.6 to 29.4 kW/m 8 to 12 hp/ft |
Standard | Single-point depth control in base |
Options | Add TruSet™ in-cab depth/pressure control |
Standard | 2 SCVs (lift and fold) at 17,237 kPa 2,500 psi for optimum raise times, additional SCV needed for optional rolling basket down pressure |
Standard | 9-pin connector for warning lights |
Options | If adding TruSet, tractor must be GreenStar™ system-ready |
Type | Level-lift: 15.2x25.4 cm 6x10 in. T-hitch, cast-steel hitch link, optional rear hitch |
Tubing | Rank tubes: 10.2x10.2 cm 4x4 in. Center frame fore-aft tubes - For 5 rank: 5.1x15.2 cm 2x6 in. Center frame fore-aft tubes - For 6 rank: 5.1x20.3 cm 2x8 in. Wing fore-aft tubes: 5.1x15.2 cm |
Number of ranks | 3-section Option 1: 9-ft (2.7-m) center frame with 5-rank tube frame Option 2: 9-ft (2.7-m) center frame with 5-rank tube frame Option 3: 9-ft (2.7-m) center frame with 5-rank tube frame Option 4: 9-ft (2.7-m) center frame with 5-rank tube frame Option 5: 11-ft (3.35 m) center frame with 5-rank tube frame Option 6: 11-ft (3.35 m) center frame with 5-rank tube frame Option 7: 11-ft (3.35 m) center frame with 5-rank tube frame Option 8: 9-ft (2.74 m) center frame with 5-rank tube frame Option 9: 11-ft (3.35 m) center frame with 5-rank tube frame 5-section Option 10: 9-ft (2.7-m) center frame with 5-rank tube frame Option 11: 9-ft (2.7-m) center frame with 5-rank tube frame Option 12: 9-ft (2.7-m) center frame with 5-rank tube frame Option 13: 11-ft (3.35 m) center frame with 5-rank tube frame Option 14: 11-ft (3.35 m) center frame with 6-rank tube frame Option 15: 11-ft (3.35 m) center frame with 6-rank tube frame |
Fore-and-aft clearance | On 9-ft and 11-ft (2.7-m and 3.4-m) center frames: 134 in. 3.4 m On 15-ft (4.6-m) center frames: 164 in. 4.2 m |
Underframe clearance | 61 cm 24 in. |
Inches | Split-the-middle 15.2 cm 6 in. *22.9 cm 9 in. and S-tine *11.4 cm 4.5 in. options (*spacing may not be exact in all locations) |
Option 1 | Spec 1.9x4.45x61 cm 0.75x1.75x24 in. Trip force 90.7 kg 200 lb Trip height 25.4 cm 10 in. Maximum operating depth 12.7 cm 5 in. Underframe clearance 61 cm 24 in. Spacing True 15.2 cm 6 in. spilt-the-middle spacing TruPosition™ C-shank standard |
Option 2 | Spec 1.59x4.45 cm 0.625x1.75 in. Trip force 68 kg 150 lb Trip height 25.4 cm 10 in. Maximum operating depth 12.7 cm 5 in. Underframe clearance 61 cm 24 in. Spacing 15.2 cm 6 in. or 22.9 cm 9 in. TruPosition |
Option 3 | Spec 1.27x4.45 cm 0.5x1.75 in. Underframe clearance 61 cm 24 in. Spacing 11.4 cm 4.5 in. S-tine |
Options | Wide variety of sweeps, shovels, and points |
Type | Center frame tires on Walk-Over tandem wheels (bias-ply tire option available) |
3-section | Option 1: (4) IF280/70 R15 134D tires Option 2: (4) IF280/70 R15 134D tires Option 3: (4) IF280/70 R15 134D tires Option 4: (4) IF280/70 R15 134D tires Option 5: (4) IF280/70 R15 134D tires Option 6: (4) IF280/70 R15 134D tires Option 7: (4) IF280/70 R15 134D tires Option 8: (4) IF320/70 R15 144D tires Option 9: (4) IF320/70 R15 144D tires |
Type | Wing frame tires on Walk-Over tandem wheels (radial tire option available) |
3-section | Option 1: (4) 11L-15 FI LR D tires Option 2: (4) 11L-15 FI LR D tires Option 3: (4) 11L-15 FI LR D tires Option 4: (4) 11L-15 FI LR D tires Option 5: (4) 11L-15 FI LR D tires Option 6: (4) 11L-15 FI LR D tires Option 7: (4) 11L-15 FI LR D tires Option 8: (4) 12.5-L-15 FI LR D tires Option 9: (4) 12.5-L-15 FI LR D tires |
5-section | Option 10: (4) 12.5-L-15 FI LR D tires Option 11: (4) 12.5-L-15 FI LR D tires Option 12: (4) 12.5-L-15 FI LR D tires Option 13: (4) 12.5-L-15 FI LR D tires Option 14: (4) 12.5-L-15 FI LR D tires Option 15: (4) 12.5-L-15 FI LR D tires |
Type | Mechanical stabilizer wheels and tires (radial tire option available) |
3-section | Option 1: Optional - (2) 9.5L-15 FI LR D tires Option 2: Optional - (2) 9.5L-15 FI LR D tires Option 3: Optional - (2) 9.5L-15 FI LR D tires Option 4: Optional - (2) 9.5L-15 FI LR D tires Option 5: Optional - (2) 9.5L-15 FI LR D tires Option 6: Optional - (2) 9.5L-15 FI LR D tires Option 7: Optional - (2) 9.5L-15 FI LR D tires Option 8: Optional - (2) 9.5L-15 FI LR D tires Option 9: Optional - (2) 9.5L-15 FI LR D tires |
5-section | Option 10: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires Option 11: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires Option 12: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires Option 13: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires Option 14: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires Option 15: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires Option 16: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires Option 17: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires |
Spike tooth harrow option 1 | Rank spacing 30.5 cm 12 in. Spike spacing 26.7 cm 10.5 in. Effective spacing 3-bar: 8.89 cm 3.5 in. 6-bar: 4.45 cm 1.75 in. Spike dimension 1.9x1.9x30.5 cm 0.75x0.75x12 in. Angle 23 to 51 degree (angle) Adjustments Tool-free three-position pin adustment 6-bar spike-tooth harrow |
Coil tine harrow option 1 | Rank spacing 38.1 cm 15 in. Tine spacing 22.9 cm 9 in. Effective spacing 5.72 cm 2.25 in. Tine dimensions Length: 40.6 cm 16 in. Angle 36 to 75 degree (angle) Adjustments Tool-free four-position pin adjustments ranging from 36 to 75 degree (angle) 4-bar coil-tine harrow |
Rolling basket harrow option 1 | Rank spacing 38.1 cm 15 in. Effective spacing 7.6 cm 3 in. Spike/tine dimensions Length: 40.6 cm 16 in. Basket diameter 35.6 cm 14 in. Bar type Round Bar size Round bar: 2.54 cm 1 in. Wall thickness: 0.32 cm 0.125 in. Bearings Maintenance free Adjustments Tool-free harrow adjustments ranging from 36 to 75 degree (angle) and hydraulically adjustable baskets up to 5,516 kPa 800 psi 3-bar coil-tine with round-bar basket |
Rolling basket harrow option 2 | Rank spacing 38.1 cm 15 in. Effective spacing 7.6 cm 3 in. Spike/tine dimensions Length: 40.6 cm 16 in. Bar type Flat Bar size 3.81x0.64 cm 1.5x0.25 in. Bearings Maintenance free Adjustments Tool-free harrow adjustments ranging from 36 to 75 degree (angle) and hydraulically adjustable baskets up to 5,516 kPa 800 psi 3-bar coil tine with flat-bar basket |
Rolling basket harrow option 3 | Spike/tine spacing 26.7 cm 10.5 in. Effective spacing 4.45 cm 1.75 in. Spike/tine dimensions 1.9x1.9x30.5 cm 0.75x0.75x12 in. Adjustments Tool-free harrow adjustments ranging from 23 to 51 degree (angle) and hydraulically adjustable baskets up to 5,516 kPa 800 psi 3-bar spike tooth with round-bar basket |
Rolling basket harrow option 4 | Spike/tine spacing 26.7 cm 10.5 in. Effective spacing 4.45 cm 1.75 in. Spike/tine dimensions 1.9x1.9x30.5 cm 0.75x0.75x12 in. Adjustments Tool-free harrow adjustments ranging from 23 to 51 degree (angle) and hydraulically adjustable baskets up to 5,516 kPa 800 psi 3-bar spike tooth with flat-bar basket |
Tongue weight rating | Varies by working width Vertical weight: 680.4 kg 1,500 lb |
Hydraulic hoses and couplers | Two circuits provided |
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.