Planter Clinics are kicking off!  View dates and locations

×

3025E

with 300E Loader
John Deere 3025E Compact Utility Tractor

3025E

Compact Utility Tractor
  • 300E Loader Included
  • Standard four-wheel drive (4WD) for maximum traction
  • Tightest turning radius in its horsepower class
  • Hydro transmission with Twin Touch™ pedals for ease of use

$16,599Was $23,6250% for 60 months financing at $16,5990% for 84 months financing also available*
Comes with a 300E Loader
Comes with a 300E Loader

The 300E loader is compact, but still strong, lifting 977 lbs without breaking a sweat. The curved boom design improved your visibility, making it easier to find what you're trying to pick up.

Tightest turning radius in its horsepower class
Tightest turning radius in its horsepower class

No more switching between forward and reverse just to make a turn. The turn radius on the 3025E is wide enough to take you around whatever is standing in your way.

Hydro transmission with Twin Touch™ pedals for ease of use
Hydro transmission with Twin Touch™ pedals for ease of use

Simple Twin Touch pedal controls make the 3 Series hydrostatic transmission one of the simplest to operate in its class. Our easy-to-use pedal controls reduce fatigue while making loader chores and dozens of other tasks a snap.

Up to 84 months financing*

Offer valid through January 31st, 2019

3025E Specs

Key Specs

Engine power (gross)18.2 kW
24.4 hp
Power take-off (PTO) power14.4 kW
19.4 hp
Steering hydraulics15 L/min
4 gpm
Implement hydraulics20.2 L/min
5.3 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms615.1 kg
1356 lb
Standard transmission; forward/reverseHydrostatic transmission (HST)
Cruise controlOptional
Approximate shipping weight (open-station; cab)1007.9 kg
2222 lb
Wheelbase159.5 cm
62.8 in.

Engine

FamilyEYDXL1.64NDA
FYDXL1.64NDA
GYDXL1.64NDA
ManufacturerYanmar
Engine model3TNV88F-EPJT2
Engine power (gross)18.2 kW
24.4 hp
Power take-off (PTO) power14.4 kW
19.4 hp
Rated engine speed2400 rpm
Injection pump typeDirect injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.64 L
3 / 100.2 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke88 x 90 mm
3.46 x 3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed69.6 Nm
51.3 lb-ft
Fuel tank capacity28.5 L
7.5 U.S. gal.

Electrical

Battery size500 CCA
Alternator (12-V)55 amp
Starter size1.4 kW
1.9 hp

Fuel system

TypeDirect injection
Fuel consumption

Transmission

Standard transmission; forward/reverseHydrostatic transmission (HST)
Final driveBull Gear
BrakesWet disc
SteeringPower steering
Axle capacityFront
798 kg
1760 lb
Rear
1197 kg
2640 lb
CreeperNo
Cruise controlOptional
Differential lockYes

Hydraulics

TypeOpen center
Pump rated outputSteering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump typeDual gear
Maximum operating pressure172.4 bar
2500 psi
Draft control sensingPosition control
Remote control valves availableUp to two (optional)

3-point hitch

TypeCategory 1
Lift capacity, 24-in. behind link arms615.1 kg
1356 lb

Power take-off (PTO)

StandardRear - 540 rpm
ControlIndependent
ClutchIndependent
Brake (for mid and rear PTO)Wet disc

Fluid capacities

Crankcase with filter4.5 L
4.8 qt

Final drive

TypeBull Gear

Operator station

Rollover protective structureType
Foldable
ASABE S478
Platform - flat/straddleSemi-flat
Gear shift location - console/floorLeft-hand side

Dimensions

Wheelbase159.5 cm
62.8 in.
Front axle clearance36.3 cm
14.3 in.
Turning radius without brakes2.9 m
9.4 ft
Approximate shipping weight (open-station; cab)1007.9 kg
2222 lb

Tires

FrontFarm - 7-14
Turf - 27x8.5-15
R4 - 25x8.5-14
R4 - 27x8.5-15
RearFarm - 11.2-24
Turf - 41x14-20
R4 - 15-19.5
R4 - 43x16-20

Offer ends January 31, 2019. Images for illustration purposes only. Other special rates and terms may be available. Subject to approved credit by John Deere Financial. Down payment may be required. Restrictions may apply outside of Hutson’s area of responsibility, see dealer for details. *Additional costs apply to 84 months financing.

Questions?
Our sales staff is here to help!