Planter Clinics are kicking off!  View dates and locations

×

1025R

with 120R Loader and Mower
John Deere 1025R Compact Utility Tractor

1025R

Compact Utility Tractor
  • Quick-Attach 120R Loader Included
  • 60" AutoConnect Deck Included
  • Standard four-wheel drive (4WD) for maximum traction
  • Tightest turning radius in its horsepower class
  • Hydro transmission with Twin Touch™ pedals for ease of use

$15,990Was $21,0700% for 60 months financing at $15,9900% for 84 months financing also available*
Comes with a Quick-Attach 120R Loader
Comes with a Quick-Attach 120R Loader

The 120R loader is compact, but still strong, lifting 977 lbs without breaking a sweat. The curved boom design improved your visibility, making it easier to find what you're trying to pick up. Comes with Quick-Attach capabilities.

Comes with a 60" AutoConnect Deck

The AutoConnect Deck will have you mowing in minutes. Simply drive over the deck and you're all set!

Tightest turning radius in its horsepower class
Tightest turning radius in its horsepower class

No more switching between forward and reverse just to make a turn. The turn radius on the 1025R is wide enough to take you around whatever is standing in your way.

Hydro transmission with Twin Touch™ pedals for ease of use
Hydro transmission with Twin Touch™ pedals for ease of use

Simple Twin Touch pedal controls make the 1 Series hydrostatic transmission one of the simplest to operate in its class. Our easy-to-use pedal controls reduce fatigue while making loader chores and dozens of other tasks a snap.

Up to 84 months financing*

Offer valid through January 31st, 2019

1025R Specs

Key Specs

Engine power (gross)17.8 kW
23.9 hp
24.2 PS
SAE J1995 rated power
Power take-off (PTO) power13.4 kW
18 hp
Steering hydraulics13.2 L/min
3.5 gpm
Implement hydraulics13.2 L/min
3.5 gpm
Hitch typeLimited Category 1
Lift capacity, 24-in. behind link arms309 kg
681 lb
Standard transmission; forward/reverseHydrostatic - 2 range
Cruise controlStandard
Approximate shipping weight (open-station; cab)655 kg
1444 lb
Wheelbase145 cm
57.1 in.

Engine

FamilyEYDXL1.27NS1
FYDXL1.27NS1
GYDXL1.27NS1
ManufacturerYanmar
Engine model3TNV80F-NCJT
Engine power (gross)17.8 kW
23.9 hp
24.2 PS
SAE J1995 rated power
Power take-off (PTO) power13.4 kW
18 hp
Rated engine speed3200 rpm
TypeDiesel
Injection pump typeIndirect Injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.267 L
3 / 77.3 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke80x84 mm
3.15x3.31 in.
Compression ratio23.0:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element with mechanical restriction indicator
Engine torque at rated speed55.2 Nm
40.7 lb-ft
Fuel tank capacity21.2 L
5.6 U.S. gal.

Electrical

Battery size500 CCA
Alternator (12-V)40 amp
Starter size1.2 kW
1.6 hp

Fuel system

TypeIndirect Injection
Fuel consumption
5.8 L/hr
1.5 U.S. gal./hr

Transmission

Standard transmission; forward/reverseHydrostatic - 2 range
Left-hand reverserNo
Final driveBull Gear
BrakesWet disc (left-hand pedal)
SteeringPower
Clutch, wet/dryN/A
Axle capacityFront
612 kg
1349 lb
Rear
715 kg
1576 lb
CreeperNo
Cruise controlStandard
Differential lockYes

Hydraulics

TypeOpen center
Pump rated outputSteering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump typeGear
Maximum operating pressure137.9 bar
2000 psi
Draft control sensingPosition control
Remote control valves availableTwo

3-point hitch

TypeLimited Category 1
Lift capacity, 24-in. behind link arms309 kg
681 lb

Power take-off (PTO)

StandardRear - 540 rpm
Mid - 2100 rpm
ControlIndependent
ClutchWet disc
Brake (for mid and rear PTO)Wet disc

Fluid capacities

Crankcase with filter2.7 L
2.9 qt
Transmission and hydraulic system3.7 gal.
14 L

Final drive

TypeBull Gear
Differential lockYes

Operator station

Rollover protective structureType
Foldable
Yes
Platform - flat/straddleOne-piece semi flat
Gear shift location - console/floorLeft-hand side

Cab

ComplianceNA
VisibilityNA
Air conditioning, temperature differentialNA
DoorsNA
Noise ratingNA
Seat equipmentNA

Dimensions

Wheelbase145 cm
57.1 in.
Front axle clearance195 mm
7.7 in.
Turning radius without brakes2.25 m
7.4 ft
Limited slip differentialNo
Approximate shipping weight (open-station; cab)655 kg
1444 lb

Tires

FrontR4 - 18x8.5-10
RearR4 - 26x12-12
Front tread range91.8 cm
36.1 in.

Miscellaneous

ToolboxYes

Offer ends January 31, 2019. Images for illustration purposes only. Other special rates and terms may be available. Subject to approved credit by John Deere Financial. Down payment may be required. Restrictions may apply outside of Hutson’s area of responsibility, see dealer for details. *Additional costs apply to 84 months financing.

Questions?
Our sales staff is here to help!