The 5M features a sloped hood. 3 inches lower than previous models, to give you more than 3 feet of extra visibility in front of the tractor. Perfect for when you need to do loader work. John Deere has also added an LED work light option to help you see better at night.
The John Deere 5M hydraulic flow network is priority-driven, open-center system that is engineered to produce plenty of hydraulic power for any application. The large valves and solenoids have a full range of motion to quickly fold, lift, and transport implements or gently feather them to fine-tune performance. That makes a huge difference when picking up hundreds or round bales or powering external hydraulic motors.
The U.S. Environmental Protection Agency (EPA) and Environment Canada requires all off-road diesel engines with 18.6 kW (25 hp) or more to meet stringent FT4 emissions regulations. John Deere uses the most efficient and cost-effective solution for the tractor package to meet emissions requirements at each horsepower level. The 5M delivers a hassle-free emissions solution that allows faster work and operation with ease.
The engine powering the 5M is EPA certified Tier Level 4. This is achieved through a combination of a diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhaust fluid (DEF, or urea).
Several defining features on the 5M maximize the performance and reliability of the emissions package. A completely shielded DOC/SCR not only protects essential components from damage, it also keeps out dirt and debris. The well-packaged and tightly organized circulation system means there is more room to work around the tractor.
Key components of the emissions system include:
John Deere has chosen to utilize an exhaust filter to reduce particulate material so the engine can operate at a level which produces less NOx. With less NOx created, less DEF is required to treat. The result is improved total fluid economy (diesel and DEF).
The engine is programmed to aggressively respond to changes in power needs, which can temporarily increase particulate matter. Since the exhaust filter removes particulate matter instead of the engine, the engine is left free to do what it is designed to do – deliver all of the power, torque, plus transient response needed.
DEF is an ISO 22241 standard aqueous urea solution consisting of 32.5 percent urea and has a freezing point of -11°C (12°F). A heated DEF tank keeps the customer in the field longer even when the temperatures drop below freezing. The DEF tank header is integrated with a temperature sensor, and plumbed engine coolant lines are used to promote thawing and prevent freezing in the tank during operation.
Mounted near the DEF tank, the electronic control unit (ECU)-controlled supply module draws diesel exhaust fluid from the storage tank and provides a pressurized flow to the dosing module. When the ignition key is off, the supply module pump will reverse direction to return any accumulated fluid back to the tank. The supply module is also fitted with a replaceable filter to prevent contaminants from entering the dosing lines. Both the supply module and dosing lines are electrically heated and controlled by the ECU to determine when DEF dosing can begin.
The dosing module is cooled by engine coolant and used to inject DEF at a pressure of 9 bar (900 kPa, 130 psi) into the decomposition tube. A harness is connected to the dosing valve that relays the needed DEF to inject based upon the amount of NOx exiting the DOC measured from the NOx tube sensor.
The decomposition tube is the internal mixing device used to circulate DEF with engine exhaust prior to entering the SCR/AOC after-treatment device.
To reduce the NOx, DEF is injected into the exhaust stream. When the exhaust gases combine with the DEF in the SCR catalyst, the NOx is broken down into nitrogen and water vapor.
Exhaust gas recirculation (EGR)
EGR reduces the high temperatures where these compounds are formed in the engine cylinders by replacing excess oxygen with a prescribed amount of cooled exhaust gas.
Exhaust gases contain more carbon dioxide than oxygen. The EGR valve, in conjunction with the venturi tube, and engine control unit (ECU), allow a controlled amount of exhaust gas to enter the intake manifold to mix with the incoming fresh air.
Replacing excess oxygen with cooled exhaust gas leads to:
In addition, EGR allows for:
For added performance and efficiency, the engine passes the exhaust gases through an EGR cooler before it enters the engine.
Exhaust airflow enters the EGR cooler from the exhaust manifold near the turbocharger. Based on engine load, air temperatures, and rpm, the ECU opens or closes the EGR valve, allowing a measured percentage of exhaust gas to enter the intake manifold. The gases mix with the rest of the incoming air from the turbocharger and aftercooler before entering the cylinders.
The PowerTech PWL 4.5L (274.6-cu in.) engine utilizes one turbocharger — a fixed geometry turbocharger. Fresh air is first drawn into the low-pressure fixed geometry turbocharger and compressed to a higher pressure. The compressed air is then routed to the charge air cooler and then to the intake manifold.
Benefits of air-to-air aftercooling
Combustion process with externally cooled EGR
Fuel-efficient combustion is achieved because sufficient oxygen is provided.
A restrained, cooler combustion is realized, since the typical hot combustion process, which is generated by an oxygen surplus, is dampened by the inert exhaust gases. Hence, NOx emissions are reduced.
For more information regarding EPA regulations and the technology behind John Deere Integrated Emissions Control systems, please visit the following link:
As rpm drops, the only way to maintain or increase horsepower is to provide additional torque. The output horsepower is greater than or equal to rated horsepower as the engine is pulled down to 1750 rpm.
The peak torque rise also occurs near the rated economy power take-off (EPTO) speed.
For operators requiring more field speeds to achieve the most precise operating ranges, as well as for quickly moving from task to task with transport speeds of up to 40.23 km/h (25 mph), the 32F/16R PowrReverser™ Plus transmission is the ideal choice. This transmission provides 32F/16R speeds for the ultimate in speed selection. Convenient push-button controls actuate the electrohydraulic high/low selector. Also incorporated into the gear shift lever is the declutch button. No foot clutching is required to shift between gears within a range.
The gear lever selects one of four speeds, all synchronized shifts for on-the-go shifting with the use of the clutch. This same lever is where the high/low control buttons are located. The rear lever selects ranges A, B, C, or D. Ranges C and D are fully synchronized. That means, when upshifting, operators can move from ranges B to C to D without stopping the tractor. On the downshift, operators can move from D back down to C without stopping.
The high/low feature benefits operators who frequently transport their tractors from field to field or find themselves in bog-down situations during rear power take-off (PTO) work. Customers can push the rabbit button (high) without having to depress the clutch to get a 20 percent increase in speed. They can also push the turtle button (low) to get a 20 percent decrease in speed, similar to downshifting or engine braking without having to grab another gear. The 32F/16R transmission includes the infinitely variable shuttle control feature. The PowrReverser™ has a built-in engagement override valve for additional safety. This valve requires the clutch pedal to be depressed one time after each engine start before the transmission will begin to operate normally, giving the operator another opportunity to put all focus on the tractor.
NOTE: A neutral start switch requires the directional lever be in the neutral position to start the engine.
All 5M Tractors have E-PTO (a fuel-saving feature) that allows customers to operate rear implements at 540 PTO rpm but at lower engine rpm. The result is lower engine vibration, reduced noise, less wear and tear on the engine, reduced fuel consumption and increased operator comfort.
NOTE: See PTO detailed feature for more information on E-PTO.
A Category 2, 3-point hitch on 5M Tractors provides the lift capacity and compatibility to perform in a variety of different applications. The 3-point hitch adapts to a wide variety of implements and has plenty of lift capacity to handle heavy implements such as planters, sprayers, and field cultivators.
Adjustable sway bars and telescoping draft links can be easily adjusted to adapt to a wide variety of implements. The right lift link also adjusts without tools for added convenience when leveling implements.
Operators do not need to carry a tool to adjust the rear hitch. Operators can also raise and lower the 3-point hitch from outside of the tractor with the conveniently located rear fender hitch controls.
An updated three-point quick hitch is offered on the 5M Tractors.
The exclusive mid-frame design on the 5M Series offers additional strength and durability but also reduces noise and vibration. Because the mid frames are made from hardened cast steel, they provide the tractor strength and stability even in the toughest conditions.
The mid frames also support and protect different pieces of essential equipment. The hydraulic pump, located between the mid-frames, is attached to the transmission for short hydraulic lines and simplified fluid flows. An optional mid-mount fuel tank allows the tractor to carry an extra 34 L (9 gal.) on cab tractors and an extra 29.5 L (7.8 gal.) on open operator station (OOS) tractors. This is especially useful for long days in the field or when a trip to fill up with diesel may not be convenient.
The mid frames are compatible with current loader mounting frames, which is beneficial for those interested in upgrading their tractors and keeping their H-Series Loaders.
A heavy tractor means more down force to keep implements in the ground. More weight also leads to improved traction and performance in the field. Because the 5M is made with heavy and durable cast steel, it weighs enough to power through those tough jobs.
The compactness of the 5M Series regarding wheelbase, weight, and total height tractor makes this tractor suited for a variety of different applications and is the perfect choice for all types of farms.
A heavy tractor also means better stability when performing loader work. Transport full bucket loads faster and lift bales higher with a stronger and more stable base.
3950 kg (8700 lb)
4040 kg (8900 lb)
4040 kg (8900 lb)
4175 kg (9185 lb)
The premium cab is designed to provide the ultimate operator experience in comfort and convenience. With the adoption of some 5R Tractor cab structures and features, John Deere has added more technology options, better visibility, and an updated, user-friendly digital display.
Some of the key features include:
Bluetooth is a trademark of Bluetooth SIG, Inc.
5M premium cabs include a subwoofer and two 4X6 co-axial speakers for premium sound quality and music delivery.
Controlling the 5M is easier and brighter than ever before. A fresh new instrument cluster displays information in a crisp, vibrant, and useful array. A larger alternator (OOS: 90 amp, cab: 120 amp) produces plenty of power for internal and external components.
This window into tractor functionality and diagnostics provides ample information. Indicators, warning lights, and even the gauges are clear and bright. The roll-mode function now provides operators with crucial onboard diagnostics. Engine hours, PTO speed, ground speed, hi-lo indicator, forward, neutral, and reverse, are all visible at the same time. There is a light-out indicator for trailer light, turn light, and hazard light bulbs which is driven by new software. A straightforward layout and sleek design requires no customer interface. When operating the PTO, there are clearly presented PTO target bars to indicate the correct PTO speed.
There are daytime and nighttime modes which are based on the position of the light switch. The mode actually adjusts the backlight levels of the display for optimum visibility.
The AutoTrac™ Universal (ATU) 200 steering kit is a machine steering kit used for automatic guidance in John Deere and non-John Deere machines. Pair the machine kit with a complete GreenStar™ system to operate automatic, hands-free guidance in approved machine platforms.
AutoTrac offers many benefits to operators, including optimized machine efficiency, reduced operator fatigue, and the ability to work at faster speeds. The ATU 200 is the premier universal steering system in the agricultural industry.
Gain accuracy, up to +/- 2.5 cm (1 in.) pass to pass with a StarFire™ 3000 Receiver
Increase profitability and reduce overlap
Reduce operator fatigue and time spent in each field
Reduce soil compaction and passes
Use many tracking options for any field
|Engine description||John Deere PowerTech™ PWL|
|Engine displacement||4 cylinders: 4.5 L|
276 cu in.
|Rated engine power||At 2100 per ISO 97/68/EC: 75 kW|
|Rated PTO power (hp SAE)||At 2100 per SAE: 63 kW|
85 PTO hp
|Transmission type||Standard: 16F/16R PowrReverser™|
Optional: 12F/4R SyncShuttle™ Plus
32F/16R PowrReverser Plus
|Hydraulic pump rated output||94 L/min|
|Rear hitch category (SAE designation)||Category 2; convertible to 1|
|Description||John Deere PowerTech PWL|
|Cylinders liners||Wet sleeved|
|Emission level||Final Tier 4|
|Displacement||4 cylinders: 4.5 L|
276 cu in.
|Rated power||At 2100 per ISO 97/68/EC: 75 kW|
|Rated PTO power (hp SAE)||At 2100 per SAE: 63 kW|
85 PTO hp
|PTO torque rise||At 1600 rpm: 30 percent|
|Type||Standard: 16F/16R PowrReverser|
Optional: 12F/4R SyncShuttle Plus
32F/16R PowrReverser Plus
|Reverser||Left hand, mechanical|
|Pump rated output||Standard: 94 L/min|
|Available flow at a single rear SCV||70 L/min|
|Number of rear selective control valves (SCVs)||Two, up to three total|
|Number of mid selective control valves (SCVs)||Two, up to three total|
|Joystick SCV control||Standard|
|Hitch draft control load sense type||Mechanical or electrohydraulic|
|Remote control valves available||Standard: Two|
|Hitch category (SAE designation)||Category 2; convertible to 1|
|Maximum lift capacity behind lift points||Standard: 2578 kg|
Optional: 2993 kg
|Sensing type||Lower link|
|Rear axle differential lock||Electrohydraulic|
|Type||Standard: Independent 540/540 Economy|
|Engine rpm (at rated PTO speeds)||540 at 2100 rpm|
540E at 1645 rpm
|Standard lift capacity||1931 kg|
|Final drive type||Inboard planetary|
|Brakes, type and control||Hydraulic wet disc|
|Front||2WD: 11L-15 8PR F2 Firestone|
MFWD: 320/85R24 (12.4R24) R1W Radial Firestone
|Rear||2WD: 460/85R30 (18.4R30) R1W Firestone®|
MFWD: 460/85R30 (18.4R30) R1W Firestone
|Wheel tread range||2WD: front: 1520-2020 mm|
rear: 1349-2055 mm
MFWD: front: 1299-1997 mm
|Turning radius with brakes||2WD: 3.67 m|
MFWD: 3.85 m
|Turning radius without brakes||2WD: 3.85 m|
MFWD: 4.0 m
|Rollover protective structure, OOS||Rigid - foldable - telescopic|
Platform - flat/straddle
Gearshift location - console/floor
|Seat||Standard: Mechanical suspension|
Optional: air ride
|dB(A) rating||78 dBA|
|Wheelbase||2WD and MFWD: 2350 mm|
|Approximate shipping weight, Open;Cab||2WD: Open: 3700 kg|
Cab: 3900 kg
MFWD: Open: 3975 kg
Cab: 4175 kg
|Fuel tank||Standard: Open: 111.9 L|
29.6 U.S. gal.
Cab: 139.1 L
36.7 U.S. gal.
Optional: Open: 141.2 L
37.3 U.S. gal.
Cab: 170.3 L
45 U.S. gal.
|Diesel exhaust fluid (DEF) tank||12.1 L|
3.2 U.S. gal.
|Country of manufacture||Augusta, GA|
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.